£1 E-Liquids
shop By category

T2 Vape e-liquid 10ml original flavour range

Our T2 Vape e-liquid in 10ml original flavour range comes in all nicotine strengths for just £1.00 each. The nicotine strengths available are 0mg (85vg), 3mg (85vg), 6mg (85vg), 12mg (50vg), 18mg (50vg). The 8 classic flavours are Blackcurrant, Blueberry, Cherry, Green Apple, Menthol, Strawberry, Tobacco and Watermelon.

T2 Vape e-liquid latest addition to the range – exotic range

Our T2 Vape e-liquid latest range of exotic flavours comes in all strengths from just £ 1.00 each. 10ml bottles come in strengths of 0mg (85vg), 3mg (85vg), 6mg (85vg), 12mg (50vg), 18mg (50vg). The exotic flavour range has Banana, Coconut, Dragon Fruit, Mango, Orange, Passion Fruit, Peach and Pineapple.

T2 Vape e-liquid Shortfills 50ml range

These shortfills contain no nicotine and are 70vg/30pg. They are ideal for use in sub ohm kits. The shortfill 50ml e-liquids are called shortfills because they are 60ml bottles which allows you to add in one nicotine shot or nicotine salt shot. For example, if you add in 1 x 10ml (18mg) nicotine shot or nicotine salt shot this will make your 0mg 50ml shortfill a bottle of 60ml liquid of 3mg nicotine strength.

Flavours in the T2 Vape e-liquid 50ml range are Blackcurrant, Blueberry, Cherry, Green Apple, Menthol, Strawberry, Tobacco and Watermelon, and the latest additions are Banana, Coconut, Dragon Fruit, Mango, Orange, Passion Fruit, Peach and Pineapple.

T2 Vape e-liquid Shortfills 100ml original flavour range

These shortfills contain no nicotine and are made up of 70vg/30pg. These are for use in sub ohm kits. The 100ml e-liquids actually are contained in 120ml bottles which allows you to add in two nicotine shots. This means if you add 2 x 10ml (18mg) nicotine shots or nicotine salt shots, this will make up your bottle of 120ml liquid with 3mg of nicotine per millilitre.

Flavours in the shortfill 100ml range are Blackcurrant, Blueberry, Cherry, Green Apple, Menthol, Strawberry, Tobacco and Watermelon.

This might be the first question to cross your mind when thinking about taking up vaping or switching from smoking cigarettes to vaping.

When you look at a bottle of e-liquid you will notice that it has what may look like random numbers and letters on it – for example, vg/pg.

PG (or Propylene Glycol) is the main liquid part of the e-liquid and contains all the flavour of the e-liquid and also the nicotine.

VG (or Vegetable Glycerine or Glycerol) is the part of the e-liquid that makes the e-liquid produce vapour or the ‘cloud’. If you want more cloud you will need to have a higher VG concentration in your e-liquid. But mind what device you use – it will very much depend on how much ‘VG’ you have in your liquid.

Water – some e-liquids have water in them to help with the texture of the liquid and also the thickness of it.

Flavourings – this is the taste that you get when vaping and will very much affect how much you’ll enjoy vaping.

Nicotine – take your pick, we have from 0mg, i.e. the e-liquid has no nicotine, right up to 18mg (18 milligram of nicotine per milliliter of liquid). The just all depends on you and how much you want in your e-liquid.

50vg/50pg – use with a regular vaporiser including pod devices
85vg/15pg – use with sub ohm kits
70vg/30pg – use with sub ohm kits
Please check the coil resistance to ensure you don’t get any leaks from your device.

Liquids are for use in open system vape kits, not closed.

We offer different vape kits to suit different needs and different preferences. To compliment your vape, T2 has partnered with NVee to bring you the best value vape devices. NVee provide quality that won’t cost you a premium price. You can click here to go to our devices page so to see complete product specifications of wattage, airflow, battery type and device size and e-liquid compatibility.

NVee Pod

Make sure you use 50vg/50pg e-liquids with this device.

This small and discreet kit is ideal for new vapers or those looking to quit smoking and try vaping.

The NVee Pod is just £5.99 . It’s simple and easy to use, without a power button – you just charge it, fill it, click in and vape.

This device uses dedicated refillable Pod Tanks – these cost just £9.99 for a pack of 4 and they can be purchased here. It’s also a good idea to fill these up with the same or different flavour e-liquids, you can easily carry these around ad change over the pods as you wish! The Pod Tanks can take 1.5ml of e-liquid so enough to get you through the day (of course, depending on how much you vape).

NVee Plus

This device is sold ready for you to set up and use with 50vg/50pg e-liquids.

This is another NVee device that’s ideal for starters but if you are an experienced vaper then it’s also a device that can be enjoyed. It’s a durable all-in-one vape pen. It’s competitively priced too at just £21.99; it looks great and is discreet enough to fit in your pocket. It as an adjustable airflow so you can tailor your vaping experience as in inhale, with the 2ml tank, these are two key differences between the NVee Plus and NVee Pod.

The NVee NVee Plus uses coils inside the tank, and needs to be changed regularly for a good vape. For a pack of 5, it’s just £9.99, these can be purchased here.

NVee Pro II

Make sure you use 85vg/15pg and 70vg/30pg e-liquids with this device.

The NVee Pro II is a sub ohm vape kit,a larger device thatlets out a bigger ‘cloud’ and allows you to set the wattage between 10W, 20W and 30W. You can also adjust the airflow to further adapt between vaping power preferences.

This kit comes with 2 coils. More replacement coils come in packs of 5 for££9.99 and can be purchased here.

TOP TIP: NVee Plus and NVee Pro II coils can be used in both of either device so you can change the coil in your device to use it with alternative e-liquid types.

NVee Pro

This sub ohm kit uses 85vg/15pg and 70vg/30pg e-liquids.

You can change your wattage output setting between 30W, 40W and 50W, and use the airflow controller to tailor your vape even more.

You should always first refer to your vape kit instructions.

Always ensure you use the right liquid with the right device. If you do use the wrong liquid, it may cause the e-liquid to leak through the device and potentially ruining your coil or tank.

If you purchase a T2 Vape E-liquid shortfill of either 50ml, it will come in a bigger bottle to allow you to add in either 10ml (18mg) of a nicotine shot or nicotine salt shot into a 50ml shortfill or 20ml (18mg) of a nicotine shot or nicotine salt shot into a 100ml shortfill. The 0mg of e-liquid will dilute and make the e-liquid 3mg of nicotine.

How to mix your 10ml nicotine shot in a shortfill bottle:

1. Unscrew the bottle cap.
2. Remove the nib from the bottle top.
3. Gently pour in the nicotine shot.
4. Replace the nib back into the bottle top.
5. Shake well.
6. Now pour your freshly made e-liquid into a compatible device, making sure you avoid the centre.

Always refer to the instructions that came with your device for more information.

Free-based nicotine is the purest form of nicotine and most commonly used in e-liquids. It is made by adding ammonia to pure nicotine. Free-based nicotine e-liquids are suitable for mod or sub-ohm devices, for people looking for a more advanced vaping experience.

Salt-based nicotine, also known as nicotine salts or nic salts, is the natural state of nicotine found in tobacco leaves. It means that you will have already experienced them if you have smoked a cigarette. It can make vaping higher nicotine levels feel more like smoking traditional cigarettes. Generally smokers need to vape less salt-based nicotine e-liquids than free-based nicotine because of the speed that nicotine can be absorbed into the blood stream. Nic Salts usually comes in higher concentrations, with more nicotine in the liquid than free-based nicotine.

There are two ways to vape, mouth to lung (MTL) and direct to lung (DTL) vaping. The difference between the two is that mouth to lung (MTL) is more for beginners as it is more like the way people smoke a cigarette; inhaling the vapour from the e-cigarette into your mouth and then into your lungs. Direct to lung (DTL) is more for the ‘cloud chasers’, people who like the more dramatic, bigger clouds of smoke or vapour. This method is more like breathing air normally, you suck the vapour straight into your lungs.

Vape kits that you will need for MTL vaping require coils; this is the atomiser element that vapourises the e-liquid. This resistance is measured in ohms and usually with these devices the coils have a resistance of 1 ohm or more. The vape kits that you will need for DTL need coils with a resistance of under 1 ohm. This allows the coil to heat the e-liquid at a higher temperature and this is what creates bigger and thicker clouds of smoke.

• T2 Vape e-liquid must be stored out of direct sunlight, in a cool and dry place.
• Ensure you check the expiry date before using.
• Please keep your T2 Vape e-liquid away from children and pets.
• Store bottle and kits upright to prevent any leakage.
• For your vape kit, you should only use the charging cable that was supplied with it.
• Always refer to the device instructions on how to use your vape kit and how to clean it.
• Avoid overcharging your kit, just charge it for as long as it needs.
• Wipe your device clean, do not wash it under a water tap.

If you need some help or advice, please contact our friendly Customer Service Team on 01827 307 777 or contact here to send us an email. We aim to respond within 24 hours.